| Features |
Benefits |
Specifications |
| Two arbor speeds of 52 and
105 rpm | Provides safe, slow machining of rotors
to 24" and drums to 28". |
| POWER REQUIREMENTS |
| Standard |
115 Volt, 50/60 Hertz |
| Optional |
* 220 Volt, 1 phase optional |
| ROTOR |
| Capacity |
4"-24", 102-610 mm |
| Maximum Width of Surface |
4 1/2", 114 mm |
| Maximum Thickness |
2 1/4", 57mm |
| DRUM |
| Capacity |
6" - 28", 152 - 711 mm |
| Depth of Cut |
10", 254 mm |
| FLYWHEEL (FLAT
OR STEPPED) |
| Capacity |
6" - 24", 152-610 mm |
| Firction Surface Capacity |
6", 152mm |
| DRUM/ROTOR/FLYWHEEL
WEIGHT MAXIMUM |
| On Standard Arbor |
150lbs., 68 kg |
| On Heavy Duty Arbor |
300 lbs., 136 kg |
| On Heavy Duty Arbor with Outboard Support |
600 lbs., 273 kg |
| SPINDLE SPEED |
| |
52-105 RPM |
| FEEDS PER REVOLUTION
|
| Rotor |
0.0030", 0.077 mm |
| Drum |
0.0046"/0.0092", 0.117 mm-0.234mm |
| MOTOR |
| |
1 HP, 0.700 kW |
| WEIGHT |
| Net |
500 lbs., 227 kg |
| Shipping Gross |
560 lbs., 255 kg |
|
| Truck arbors and extensive
accessories | Featuring two truck shops with
1 7/8" OD arbor standard, either with or without an outboard support
expanding the machining capacity to 600 lbs, the 8989 says TRUCK. |
| Expanded facing width | Rotors
to 4.5" and drums to a full 10" facing width gives you the range
to handle just about anything you can fit in your building. |
| Positive rake cutter tip
angle |
Provides for one pass finish virtually everytime,
allowing you to complete the work faster than multiple pass machining processes.
Metal and heat come off the top of the tip as you machine allowing for
one pass machining with virtually any depth of cut. Get it in, get it out
faster then any lathe in the industry. |
| Dovetail Way and Adjustable
Gibb Design | The most dependable repeat guidance
system in the machining industry. System provides for the ability to
adjust out any tolerance increase caused by years of wear. Maintain factory
tolerances for the life of the lathe. Dovetail ways are covered by stainless
steel way covers for maximum performance. |
| Tapered Roller Bearing Spindle |
The lathe spindle is supported by Timken tapered
roller bearings for years of maintenance free turning, the same system
that automotive spindles have relied on for years. |
| Massive lathe housing casting |
Combining a total mass of 500 lbs and a solid table
top platform design the 8989 eliminates transient vibrations ensuring a
smooth uninterrupted surface finish on every pass. Cutting platform actually
sits in a 200 lb iron casting, not suspended on a support mechanism
|
| Independent AC feed motors |
Utilizing independent feed motors for rotor and
drum improves the lathes versatility to machine all varieties of drums
and rotors. Through a separated switch wiring we substantially reduce the
possibility of catastrophic operator error. Providing smooth, consistent
feed, day in and day out for years. |
