| Features |
Benefits |
Specifications |
| Infinetly adjustable feed
rates | You have the ability to easily modify
the feed rate with the turn of a dial. Reduce the cut time or increase
the microfinish dependent on the jobs needs. Now you have the versatility. |
| POWER REQUIREMENTS |
| Standard |
115 Volt, 50/60 Hertz |
| Optional |
* 220 Volt, 1 phase optional |
| ROTOR |
| Capacity |
4"-24", 102-610 mm |
| Maximum Width of Surface |
4 1/2", 114 mm |
| Maximum Thickness |
2 1/4", 57mm |
| DRUM |
| Capacity |
6" - 28", 152 - 711 mm |
| Depth of Cut |
6", 152 mm |
| FLYWHEEL (FLAT
OR STEPPED) |
| Capacity |
6" - 24", 152-610 mm |
| Firction Surface Capacity |
6", 152mm |
| DRUM/ROTOR/FLYWHEEL
WEIGHT MAXIMUM |
| On Standard Arbor |
150lbs., 68 kg |
| On Heavy Duty Arbor |
300 lbs., 136 kg |
| SPINDLE SPEED |
| |
100-150-200 RPM |
| FEEDS PER REVOLUTION
(Infinitely Variable) |
| Rotor |
0.001"-0.010", 0.026 mm - 0.254 mm |
| Drum |
0.0015" - 0.015", 0.039 mm - 0.381 mm |
| FEEDS PER MINUTE
(Infinitely Variable) |
| Rotor |
0.25" - 1", 6.35 mm - 25.4 mm |
| Drum |
0.375" - 1.5", 9.53 mm - 38.1 mm |
| MOTOR |
| |
1 HP, 0.700 kW |
| WEIGHT |
| Net |
474 lbs., 215 kg |
| Shipping Gross |
535 lbs., 243 kg |
|
| Three arbor speeds | Easily
change arbor speeds in seconds, Choose 100, 150 or 200 RPM dependent on the
size of work at hand. Speed up for smaller import work, slow down for larger
truck work. |
| Positive rake cutter tip
angle | Provides for one pass finish virtually
everytime, allowing you to complete the work faster than multiple pass
machining processes. Metal and heat come off the top of the tip as you
machine allowing for, regardless of the amount of material. |
| Dovetail Way and Adjustable
Gibb Design |
The most dependable repeat guidance system in the
machining industry. System provides for the ability to adjust out any tolerance
increase caused by years of wear. Maintain factory tolerances for the life
of the lathe. Dovetail ways are covered by stainless steel way covers for
maximum performance. |
| Tapered Roller Bearing Spindle | The
lathe spindle is supported by Timken tapered roller bearings for years
of maintenance free turning. |
| Massive lathe housing casting |
Combining a total mass of 470 lbs and a solid table
top platform design the 8944 eliminates transient vibrations ensuring a
smooth uninterrupted surface finish on every pass. |
| Independent DC feed motors |
Utilizing independent feed motors for rotor and
drum improves the lathes versatility to machine all varieties of drums
and rotors. Through a separated switch wiring we substantially reduce the
possibility of catastrophic operator error.
|
