Atlantic Auto Suppliers - Accuturn

Atlantic Auto Suppliers, Inc

141 NE 24th Street Miami, Florida 33137 USA

305.576.6951 FAX 305.576.3740 TOLL FREE: 1.800.525.LIFT

E-mail: mail@atlanticautosuppliers.com

Back to Accu-turn Page

Model 8920 - High Speed Brake Lathe

View Brochure

Accessories

Description

If turn around time is high on your "got to have" list, the 8920 is the lathe for you. With a 180rpm shaft speed this lathe can machine a 2" face rotor in less then 4 minutes, regardless of the depth of cut. It also happens to be our least expensive bench lathe.

•One pass finish strength insures a premium product in minimal machining time. Our fastest brake lathe.
•Independent feed motors provide maximum versatility and ease of use.
•Dovetail way and adjustable gibb construction insures that you can maintain peak performance for the life of the lathe

The Accu-turn model 8920 bench lathe is our fastest bench lathe, offering the best compromise of reduced speed and superior surface finish. With a 180 rpm arbor speed the 8920 machines most 2 face rotors in LESS then 4 minutes while still achieving the flatness, parallelism and surface finish you expect from the Industry's leading lathe manufacturer. Of course the 8920 also incorporates Accu-turn's legendary one cut finish performance with the simplicity and durability required for all levels of technicians. Designed to handle virtually all passenger and light truck rotors and drums. Optional accessories and shops available for expanded medium duty truck work.

Features

Benefits

Specifications

Increased arbor speed

Turnaround time on rotors and drums is reduced to the lowest possible time without sacrificing surface finish or cutting tip life. Sure we could have gone faster, but we won't ever sacrifice the finish and quality machining capability you expect from Accu-turn by creating dazzling speed claims. We provide you with the best of both worlds. Reduced time and quality finish.

POWER REQUIREMENTS
Standard	115 Volt, 50/60 Hertz
Optional	* 220 Volt, 1 phase optional
ROTOR
Capacity	4" - 24", 102-610 mm
Maximum Width of Surface	4 1/2", 114 mm
Maximum Thickness	2 1/4" - 57 mm
DRUM
Capacity	6" - 28", 152 - 711 mm
Depth of Cut	6", 152 mm
DRUM/ROTOR WEIGHT MAXIMUM
On Standard Arbor	150 lbs., 68 kg
On Heavy Duty Arbor	300 lbs., 136 kg
SPINDLE SPEED
	180 RPM
FEEDS PER REVOLUTION
Rotor	0.0046", 0.117 mm
Drum	0.0046", 0.117 mm
MOTOR
	1/2 HP, 0.700 kW
WEIGHT
Net	469lbs., 213 kg
Shipping Gross	530lbs., 241 kg

Positive rake cutter tip angle

Provides for one pass finish virtually everytime, allowing you to complete the work faster than multiple pass machining processes. Metal and heat come off the top of the tip as you machine allowing for one pass machining with virtually any depth of cut. Get it in, get it out faster then any lathe in the industry.

Dovetail Way and Adjustable Gibb Design

The most dependable repeat guidance system in the machining industry. System provides for the ability to adjust out any tolerance increase caused by years of wear. Maintain factory tolerances for the life of the lathe. Dovetail ways are covered by stainless steel way covers for maximum performance.

Tapered Roller Bearing Spindle

The lathe spindle is supported by Timken tapered roller bearings for years of maintenance free turning, the same system that automotive spindles have relied on for years.

Massive lathe housing casting

Combining a total mass of 470 lbs and a solid table top platform design the 8920 eliminates transient vibrations ensuring a smooth uninterrupted surface finish on every pass. Cutting platform actually sits in a 200 lb iron casting, not suspended on a support mechanism

Independent AC feed motors

Utilizing independent feed motors for rotor and drum improves the lathes versatility to machine all varieties of drums and rotors. Through a separated switch wiring we substantially reduce the possibility of catastrophic operator error. Providing smooth, consistent feed, day in and day out for years.