•The first twin-post above ground lifts with the capacity to handle extra-heavy vehicles such as utility trucks, delivery  vehicles, ambulances, rescue trucks, construction trucks, up to class 6 vehicles
•Installation is quick & easy, just bolt the lift to the supplied sub-frame or concrete floor.
•Ideal for fleet operations, truck repair, and garages
•Standard 5", 7 1/2", 10" truck frames adaptors make it easy to lift any truck with running boards or high-frame utility vehicles

• Heavy duty track construction made of three parallel 10" I beams.
• Direct drive cylinders mean minimal maintenance with no "top rail" to get in the way.
• Available in 20', 25' and 30' long runways or custom lengths upon request.
• Mohawk offers a full 5 year warranty.
• The heaviest construction of any competitive lift. Just compare.

• Choice of 35,000 lbs. or 50,000 lbs. or heavier capacities.
• Unrestricted under vehicle access.
• Three-phase, 60-cycle, 5 or 7.5 horsepower electric motor powering a submersible hydraulic pump rated for 5 GPM at full system pressure.
• Fully interlocked, redundant safety systems, featuring Mohawk's patented infinite positioning mechanical stop.
• Free-standing, fully instrumented control panel for safety, convenience and ease of operation (or optional post mounted controls).
• Standard ramp lengths of 20, 25 and 30 feet (custom lengths available upon request).
• Rolling jack beam serves as stable foundation for raising wheels off the lift ramp.
• Wheel chocks assure stability of the positioned vehicle.
• Easily installed in just one day.
• Five-year warranty.

•Runways are made form three parallel 8" steel I beams
•Heavy duty 7" x 5" structural steel cross rails
•Large 10" x 6" top rail is reversible to either side
•Chain drive---no stretch or fray like cable lifts
•Specially designed, double sealed, self lubricating, hardened steel rollers at all chain pivot points
•Mohawk offers a full 5 year warranty and the industry's only lifetime cylinder warranty*

•Full 4’ of clear, unobstructed under-the-vehicle access without structural cross brace.
•Capacities in 36,000, 50,000, 75,000 & 100,000 lbs with 8 model track lengths from 26 to 44’ long.
•Surface mounted or flush mounted. Only Mohawk’s Parallelogram lifts high enough and is designed to later become a flush mounted lift.
•Clear span between the platforms with no obstructive tie bar across the floor.

•Designed to make lawn equipment maintenance efficient, safe and productive.
•Safely raises all equipment to proper working height.
•Speeds your maintenance & repair procedures, to aid vehicle diagnosis BEFORE there’s a costly out of service  breakdown.
•Full 7,000 lb. capacity for servicing the largest equipment.

•1000 lb. capacity
•Use with any above-ground, or in-ground lift or any time heavy-duty truck tires must be removed
•High 46" lifting height
•6" side shifting ability makes alignment of lug holes simple
•Heavy-duty conveyor type rollers on lifting arms aid in realignment of bolt pattern
•When fully loaded, heavy-duty 4" steel ball bearing casters allow easy movement
•Two rear 360 degree swivel casters are equipped with caster locks
•Tilting lift arms aid axle realignment and provide additional stability to the fully loaded dolly
•Safety chain provided to secure loads
•High gear ratio brake-winch allows for easy one handed operation making tire removal and replacement a one man  job
•Fully assembled & ready to use

•Allows you to convert your frame contact lift to a wheel engaging lift and back to a frame contact lift quickly and easily
•Faster vehicle set-up than frame contact lifts
•Ideal for 13" through 16" tires
•Adaptors quickly disconnect from arms to return to a frame contact lift
•Standard models fit vehicle wheelbases up to 116 1/2"
•Optional LMF-12 and TP-15 longer version available with additional 5" longer swing arm and 5" longer sliders for  wheelbases up to 138"
•Great for alternate fuel vehicles such as battery, natural gas, propane, etc., where frame access is difficult
•Use on the front arms, rear arms or all arms
•Keeps tires at "street level" for exhaust work
•The advantages of a 4 post ramp lift, with the versatility and flexibility of a 2 post frame contact lift yet takes up less  valuable shop space than would any 4 post lift
•Available for MOHAWK 9,000, 12,000 or 15,000 lb. capacity two post lifts

•Fits All Mohawk 9,000, 12,000 and 15,000 lbs. Lifts
•Mohawk Speedlane gives you full working access to the underside of the car.
•You can use both adapters or just one for more access to one side of the vehicle or the other. Changeover in  seconds.
•Turn your Two-Post Lift into a quick, Drive-On Lift for all cars and light trucks